Astro 658 World's 1st True Air Powered Slide Hammer

 Purchase here: Astro 658 Slide Hammer

Introduction:

The Astro 658 air slide hammer puller revolutionizes the way you remove hubs and rotors, offering a powerful, efficient, and user-friendly solution. As the market's first true air-powered slide hammer, it delivers up to 1200 hammer blows per minute, making it ideal for tackling even the most stubborn, rusted, or stuck parts. In this guide, we'll explore how to use the Astro 658 to remove hubs and rotors, the advantages of this tool, and some helpful tips for getting the job done right.

What Makes the Astro 658 Unique?

• Unmatched Power: With up to 1200 hammer blows per minute, the Astro 658 provides the necessary force to break loose stubborn hubs and rotors, where manual methods often fall short.
• Versatility: It features common 5/8”-18 threads, compatible with a wide range of attachments, making it suitable for various pulling tasks, from pilot bearings to heavy-duty collision repair.
• Adjustable Force and Speed: The lever throttle allows you to adjust the force and speed of each pull, ensuring that you can tailor the power to your specific needs, whether you're dealing with rusted parts or more delicate components.

Step-by-Step Guide: Removing Hubs and Rotors with the Astro 658

Step 1: Gather Your Tools and Prepare the Work Area

• Ensure you have the Astro 658 air slide hammer, an appropriate attachment for the hub or rotor, and a reliable air compressor.
• Make sure the vehicle is safely elevated and the wheel has been removed.
• Inspect the hub or rotor for rust and debris that may hinder the removal process.

Step 2: Attach the Slide Hammer to the Hub or Rotor

• Choose the correct slide hammer attachment for the hub or rotor you are working with.
• Thread the attachment securely onto the Astro 658's 5/8”-18 threaded spindle.
• Connect the air slide hammer to the air compressor, ensuring the connections are secure.

Step 3: Use the Astro 658 to Remove the Hub or Rotor

• Position the slide hammer attachment onto the hub or rotor.
• Hold the tool firmly and use the lever throttle to adjust the force and speed.
• For rusted or seized parts, apply steady pulls with the Astro 658, letting the air hammer deliver consistent impacts to gradually break the part free.
• If working with less stuck components, adjust the throttle to a lower force to prevent damage.

Step 4: Inspect the Removed Part and the Surrounding Area

• Once the hub or rotor is free, carefully remove it from the assembly.
• Inspect the surrounding area for any signs of wear or damage that may need addressing before reassembly.
• Clean any rust or debris from the mating surfaces to ensure a smooth fit when installing the new component.

Tips for Using the Astro 658 Effectively

• Choose the Right Attachment: Ensure you use the proper attachment for the hub or rotor you’re removing to avoid damage and maximize the tool's efficiency.
• Adjust the Force: Use the lever throttle to control the force, especially when dealing with more delicate parts to prevent accidental damage.
• Safety First: Always wear safety goggles and gloves while using the Astro 658, as the high-speed impact can dislodge rust or debris.